Community discussions

MikroTik App
 
marcrisse
just joined
Topic Author
Posts: 24
Joined: Tue Feb 16, 2016 9:16 pm
Location: Germany

Bonding Mode 0 (balanced-rr)

Wed Jan 10, 2018 12:24 pm

Hi,

I want to connect my PC with a NAS with 2 x 1Gbit/s over CRS125-24G-1S (ROS 6.41). First I created bond0 with ether21+ether22 to NAs and bond1 with ether23+ether24 to the PC. I added these to a bridge. Result: 460Mbit/s real, expected: 2000Mbit/s
After some readings it is clear to me that balanced-rr needs the CPU and the switch-chip of CRS125 has only 1Gbit/s upstream to the CPU. So, the 460Mbit/s is explainable.
But how can I get a real 2Gbit/s connection over the CRS? I choosed balanced-rr because I want the throughput for a single connection (scp/rsync), so LACP won't give me any benefits. Any ideas?
 
pe1chl
Forum Guru
Forum Guru
Posts: 10529
Joined: Mon Jun 08, 2015 12:09 pm

Re: Bonding Mode 0 (balanced-rr)

Wed Jan 10, 2018 12:26 pm

Get a real switch!
 
marcrisse
just joined
Topic Author
Posts: 24
Joined: Tue Feb 16, 2016 9:16 pm
Location: Germany

Re: Bonding Mode 0 (balanced-rr)

Wed Jan 10, 2018 12:30 pm

Get a real switch!
Any suggestions?
 
pe1chl
Forum Guru
Forum Guru
Posts: 10529
Joined: Mon Jun 08, 2015 12:09 pm

Re: Bonding Mode 0 (balanced-rr)

Wed Jan 10, 2018 1:07 pm

E.g. Aruba networks (formerly HP Procurve).
I have good experience with them. They have features you expect from switches, and they do actually work.
 
User avatar
ADahi
Member Candidate
Member Candidate
Posts: 209
Joined: Thu Sep 21, 2017 7:16 pm
Location: Iraq, Ninavah
Contact:

Re: Bonding Mode 0 (balanced-rr)

Wed Jan 10, 2018 1:14 pm

Who is online

Users browsing this forum: No registered users and 17 guests