PPPoE Server Help

ChildOTK · Wed Dec 27, 2006 7:44 pm

Hi all,

I am having some trouble with the PPPoE server. most of it is fine, trouble is the client's on an AP. i have 3 client's going through one AP in bridge mode, 1 person connects and all is fine, a second connects and suddenly both are dead.

Please help. Any will be appreciated. Thanx.

mikapojic · Thu Dec 28, 2006 11:13 am

If you are using Senao or Pheenet as client device there is problem with 2 or more pppoe connections at same time. We are solving that problem with VPN connection.

ChildOTK · Thu Dec 28, 2006 10:36 pm

mmm, then there is my problem...

I have a Senao AP configured in bridge mode, and a hub connected to that, with the 3 clients on. How can I solve it with the VPN? Just make them login with VPN instead of PPPoE?

mikapojic · Fri Dec 29, 2006 11:12 am

You just make them login with vpn and that will solve your problem. Or you coulg give each of them IP, but than you are giving up on authentication and lot of control on user. Best way and we have tried everything is to authenticate via VPN.