Page 1 of 1
AP client issue plz help
Posted: Sun Jan 07, 2007 11:19 pm
by wissammohamed
hi guys
i have users connest to my MT with lan,lan wireless, and ap client
i configered hotspot...... and put the shared key=1
the users who connect to my MT from lan and lan wireless work fine
the problem is i have 5 users connect to (one AP client)
when i see the log the 5 users keeps login and logout every 30 sec- 1 min
i discoverd that when one of the 5 users login , the other one logout
because the hotspot see the 5 users with one mac address(the mac of AP client) .
what shell i do to solve this problem
thanx
Posted: Mon Jan 08, 2007 12:30 am
by wissammohamed
ANY ONE PLZ
Posted: Mon Jan 08, 2007 8:55 am
by sergejs
Most likely problem is with your AP, that is performing MAC-cloning (using one MAC-address for all connected clients).
You need to increase 'addresses-per-mac', if they are using the same login/password data, then you need to incerase 'shared-user' option.
Posted: Mon Jan 08, 2007 3:58 pm
by wissammohamed
Most likely problem is with your AP, that is performing MAC-cloning (using one MAC-address for all connected clients).
You need to increase 'addresses-per-mac', if they are using the same login/password data, then you need to incerase 'shared-user' option.
thanx for ur reply
the users have diffrent (login/password data)
but how to increase addresses-per-mac from MT or AP
and if i increase 'addresses-per-mac , Is this process will work
note i want to put shared-user=1
Posted: Mon Jan 08, 2007 4:04 pm
by sergejs
Disable HotSpot uniuversal client feature,
'ip hotspot set 0 address-pool=none' (client using incorrect IP address settings will not connect to the internet).
'address-per-mac' is available under 'ip hotspot'.
Report back if you will have any problems.
Posted: Tue Jan 09, 2007 12:06 am
by wissammohamed
thanx for ur replay sergejs
but i need to ask u what Usefull of 'address-per-mac'
and what it mean "address-per-mac=2"
i will try it and replay to u
thanx again
Posted: Tue Jan 09, 2007 10:36 pm
by wissammohamed
Disable HotSpot uniuversal client feature,
'ip hotspot set 0
what do mean with that
Posted: Wed Jan 10, 2007 7:40 am
by sergejs
You need to disable Universal client, tool that translates any client IP address to the appropriate HotSpot address.
'ip hotspot set 0', I assume that you have one HotSpot, 0 is the corresponding number of HotSpot server,
anyway 'ip hotspot print' is required before 0 or any other number will be used.