Hi Guys

Looking for a little support on a short PtP link that I have issues with

The link is a pair of SXTsqAC, updated to 6.42.2, distance is aprox 0.7Km, LOS is clear and there is literally nothing else on 5500-5800...the SNR is a healthy 61Db, with the link speed being detected at 300Mbps.

If i set the protocol to NV2, the link will not pass any data at all, it cannot even get an IP address over DHCP, set it to NStreme, it connects but throughput is topping out around 45 - 50 Mbps

Any thoughts or suggestions? - just about to try pure 802.11 and see what happens - but i've never had an issue with NV2 previously where it wouldnt pass any data

Mark

6.41.x is not ready with wave2 chipset. Try 6.42rc30 and higher.
See this topic: viewtopic.php?f=7&t=131017&p=644068#p644055