MikroTik

Dear Forum users!
I successfully set up the L2TP VPN server in Mikrotik and Windeos client can connect.
Problem is that only the router IP is avalibale noting else.

Subnet between sites are different and in Mikortik there is vpn-pool defined for connections but from the same subnet.

Any other help appreciated.

Did you allow traffic between the different subnets?

For example:

If my lan is 10.1.1.0/24

and my VPN users are on 10.1.2.0/24

I have to allow traffic between the two subnets.

If that doesn't work, can you post your config?

you should set a filter rule to access the lan ips
when you connect to vpn you are in router but dont reach the lan ips
you should set access to what ip you want reach with filter rule

Under PPP>Profiles, be sure to set bridge=(your bridge).