Hi all,
I just bought the new hAP ac2 with RouterOS 6.41.2.
From the default configuration, I did the following to configure for Android tethering:
1. Attach the phone via USB port and turn on USB tethering
2. Interface lte1 automatically detect on the interface list.
3. Add DHCP client on lte1 and add default route. Check that the interface is bound and IP address received from Android phone.
4. Add new firewall rule (srcnat , action = masquerade , out interface = lte1)
but clients connected to wlan and lan ports are not able to access internet.
Is there anything else to do?
Is the default config of eth1 as WAN has anything to do with this issue?
Thank you.