Hi All
I'm totally new to Vlan's and would like to set up the following.
Mikrotik to Cisco, with 2 vlan's on cisco.
Vlan 1 to be 192.168.1.x
Vlan 2 to be 192.168.2.x
I've got a wan port on the MT, and want traffic to go from the wan to the 2 vlans.
Can anybody help me configure the MT and the Cisco please before I loose all my hair!
Cheers
Glen
Cisco Catalyst 1900? Really? That's ancient! Where did you get that one from? Anyway, the Catalyst 1900 does not support 802.1q VLAN tagging/trunking, it only supports the older, Cisco proprietary ISL protocol, which is not compatible with other vendors, including MikroTik RouterOS. You will probably not be able to create a working VLAN trunk between the Cat 1900 and your router.
--Tom
--Tom
Depends on the model and the installed IOS version. Any version that supports dot1q will do, versions that only support ISL will not work.any one know if a cisco 2900 which supports vlans, woudl be compatable with vlan tagging on MT 2.9.39?
All currently not EOL'd Catalyst 2900 versions (such as 2950, 2960) do support dot1q, but I have seen some older 2916 a few years ago that
did not, so if you plan to buy an older model on the second-hand market you'd have to check with the seller in advance.
--Tom
