MikroTik

Posted: **Mon Apr 09, 2018 2:09 pm**

Hello.

I've just received a packed with hAP ac^2 and cAP ac devices. After making some basic tests I noticed a problem with Current Tx Power section. For 2,4GHz all values are 0dBm, for 5GHz nothing is displayed

I applied the newest RouterOS (even RC) and nothing happened. I also tried changing frequency-mode and coutry and still nothing.

Posted: **Tue Apr 24, 2018 2:39 pm**

+1
Have same issue with "Current TX power" for 5Ghz... no data

Posted: **Fri May 11, 2018 7:51 am**

I have a problem with it too
2Ghz can not change or always 0dB. 5Ghz does not show any value

Posted: **Thu Jun 21, 2018 7:15 pm**

cap ac, 6.42.4.
The same problem.

Posted: **Sun Jan 27, 2019 4:15 pm**

No tx power inforamtion. @ 2G show zeros, @ 5G nothing at all.

6.42.11

Posted: **Sun Jan 27, 2019 5:11 pm**

This "feature" has been discussed here already :
viewtopic.php?f=7&t=143720

MikroTik

No Current Tx Power for hAP ac^2 and cAP ac

No Current Tx Power for hAP ac^2 and cAP ac

Re: No Current Tx Power for hAP ac^2 and cAP ac

Re: No Current Tx Power for hAP ac^2 and cAP ac

Re: No Current Tx Power for hAP ac^2 and cAP ac

Re: No Current Tx Power for hAP ac^2 and cAP ac

Re: No Current Tx Power for hAP ac^2 and cAP ac