Page 1 of 1
SXT LTE USA KIT w/ R11e-LTE-US
Posted: Thu Jul 19, 2018 2:55 pm
by Quaziee
I was wondering if anyone can help me figure out what band the modem is using and how to change it?
When I click the down arrow the box disappears, also when I type /interface lte info 0 it does not show what band is currently being used.
Thank you for time, and help
David Huizenga
Re: SXT LTE USA KIT w/ R11e-LTE-US
Posted: Thu Jul 19, 2018 3:04 pm
by sindy
What gives you the channel information is the earfcn number. 5110 converts to 709 MHz (uplink) and 739 MHz (downlink). See e.g.
this online calculator or
this more up-to-date table.
Re: SXT LTE USA KIT w/ R11e-LTE-US
Posted: Thu Jul 19, 2018 3:10 pm
by Quaziee
Thank you for your fast reply, now how do I change the band to say band 2 to see if I can get better speed?David Huizenga
Re: SXT LTE USA KIT w/ R11e-LTE-US
Posted: Thu Jul 19, 2018 3:32 pm
by uldis
changing band for the R11e-LTE-US is not supported. It chooses automatically the LTE band. You can only disable the 3G mode and leave only LTE mode enabled.
Re: SXT LTE USA KIT w/ R11e-LTE-US [SOLVED]
Posted: Thu Jul 19, 2018 10:10 pm
by Quaziee
Okay, thsnk you. Will there ever be a time we will be able to change bands? Ohh and one more thing how do i mark this topic as solved/closed?
Re: SXT LTE USA KIT w/ R11e-LTE-US
Posted: Sun Apr 07, 2019 7:23 pm
by drracing07
Is there an at command or some other way around this? This is important to me since my radio is connecting to a high frequency band and it's on the fringe, where 700 mhz band 12 is fine here. need to be able to set it.