Is there a case for RBM33G, which supports mounting 4x LTE antennas? CA433U only supports 3 antennas. Thanks.

Do you have 3d printer? https://www.thingiverse.com/thing:3561672
3D model of box for RBM33G. Thanks to mrkrash.

https://rfelements.com/products/integra ... r-class-2/

I use this

Also I drilled the CA433 with 4 holes and putted the 4 SMA pigtails.

Regards.

Hi there

We need rack mount case for rbm33g and rm953gs and could not find any. So we make our own.

https://photos.app.goo.gl/QbSX9XDzjbNaydPTA

it also has space already cut for 1 Ethernet port and 2 aerial port

Regard
Jonathan X Peers

Hi there

We need rack mount case for rbm33g and rm953gs and could not find any. So we make our own.

https://photos.app.goo.gl/QbSX9XDzjbNaydPTA

it also has space already cut for 1 Ethernet port and 2 aerial port

Regard
Jonathan X Peers

hi,
how do you cut the sim card slots, on the bezel?

Lazer cut

: |
just unboxed my ca433u ...
unfortunately all our Jedi-Knife guys are on vacation ...
... I'm a little bit disenchanted that the ca433u not even support 6mm diameter SMA/RP-SMA-antenna-pigtails ...
.
... why not a self-ad stencil for inside and outside the antenna-side (like the ones that are part of the set for the cable-side ) ... should be stable enough ...
... so it's MacGyver-style again ... MacGyver-style works ... but a MacGyver-episode ... lasts ? ... 40 minutes ? ... ( and it needs days of sizzling for these 40 minutes : \ )
.

or ... a second set of bungs ... which supports sma-connector diameter ...
.
or a version for self-drilling !? ... ( btw.: is this one for NYM-J-cable ? )
.

.
so ... guess every semi-pro case modder will give me the very long face for it ...
but homeland-networks ltd. is working on very tight budgets.
the acrylic tiles came from a coarse-cut QSFP-case (Fibershop ... real McGyver quality ! ... the acrylics ... not the shop)
connected to the case with patches of mirror tape ... case closed : )
.