MikroTik

Posted: **Thu Feb 15, 2007 4:03 pm**

Hi,

We had to do a new mikrotik setup and got outselves a D946GZIS motherboard, disabled SATA in the BIOS and installed MT on FLASH, now it will not recognize the onboard LAN controller.

/system resource pci print detail

0 device="04:08.0" name"unknown device (rev: 1)" vendor="Intel Corporation" category="Ethernet controller" vendor-id="0x8086" device-id="0x1094" irq=11 memory=0x50000000-0x50000FFF io=0x1000-0x103F

....

/driver print > no output ....

....

/interface ethernet print > no output

.....

motherboard details

Intel® Desktop Board D946GZIS

10/100 Mbits/sec LAN subsystem using the
Intel® 82562G Platform LAN Connect (PLC) device

any help will be great...

regards
RB

Posted: **Thu Feb 15, 2007 6:51 pm**

0 device="04:08.0" name"unknown device (rev: 1)" vendor="Intel Corporation" category="Ethernet controller" vendor-id="0x8086" device-id="0x1094" irq=11 memory=0x50000000-0x50000FFF io=0x1000-0x103F

Pretty obvious. The card arn't supported...

Posted: **Thu Feb 15, 2007 8:29 pm**

The chip should be in the unified intel driver, however it's 10/100 and maybe they didn't upgrade the e100 package recently.

Posted: **Fri Feb 16, 2007 11:09 am**

v3 has the latest open intel driver. v2.9 does not have it

Posted: **Wed Jan 30, 2008 10:13 pm**

Hi all, this chipset is already suported in ROS V 3???

MikroTik

New Intel boards with 946 chipset not showing LAN

New Intel boards with 946 chipset not showing LAN

Re: New Intel boards with 946 chipset not showing LAN

Re: New Intel boards with 946 chipset not showing LAN