hAP AC slow download, normal upload speeds in default NAT Mode
Posted: Sat Sep 29, 2018 10:31 am
Hey everyone,
I have a hAP AC which wirelessly joins a WiFi provided by a MiFi Router (192.168.8.0/24) to
enable wired internet access, since the Mifi Router has no wired ports.
The config is based on the default config whereas the following changes have been made
The Problem, though, is that the speed is crap but strangely Upload runs ~20Mbit but Download only ~5MBit.
To ensure that the Mifi Router is not the bottleneck, I connected by mobile phone which makes 20MBit up+down.
What can I do to untangle the router and improve from 5Mbit to 20Mbit in download affairs?
Best wishes from Northern Germany
I have a hAP AC which wirelessly joins a WiFi provided by a MiFi Router (192.168.8.0/24) to
enable wired internet access, since the Mifi Router has no wired ports.
The config is based on the default config whereas the following changes have been made
- Connect to available Wireless Network according to guide -> https://wiki.mikrotik.com/wiki/Connect_ ... ss_Network
- When changing the NAT Interface the default script shows "device lists", which I changed to explicit interface "wlan1"
The Problem, though, is that the speed is crap but strangely Upload runs ~20Mbit but Download only ~5MBit.
To ensure that the Mifi Router is not the bottleneck, I connected by mobile phone which makes 20MBit up+down.
What can I do to untangle the router and improve from 5Mbit to 20Mbit in download affairs?
Best wishes from Northern Germany