hi guys
my Internet BW is 512kps down /256kps up
i need to divid Equally the BW for active users Automatically
EX
when 10 users is active the BW for each one is 51.2kps down / 25.6kps up
when 20 users is active the BW for each one is 25.6kps down / 12.8kps up
thanx
-
-
wissammohamed
Frequent Visitor
- Posts: 85
- Joined:
can i do this in MT
Last edited by wissammohamed on Mon Feb 19, 2007 1:15 am, edited 1 time in total.
PCQ
Yes, mrz your link is good. But mr wissammohamed says that he want to flexible his connection.. ex : 10 connextion or 20 connection, the entire network must have the equal bw. Can anyone suggest the script for this??, coz i didn't understand about how to script.... 
Re: PCQ
You don't need scripts at all, PCQ adds dynamic queue for each active user, and divides available bandwidth equally among all users.Yes, mrz your link is good. But mr wissammohamed says that he want to flexible his connection.. ex : 10 connextion or 20 connection, the entire network must have the equal bw. Can anyone suggest the script for this??, coz i didn't understand about how to script....
Lets say we have 3 users and total bandwidth is 3mbit/s.does PCQ only divide the connections equally , what if there is some connections are much higher in download rate ?
Users one and two are browsing the web, reading emails etc., they both are using (lets say) 1Mbit/s, not more. Third user is downloading something and he gets 2Mbit/s (all bandwidth that is not used)
But if all three users want to download something at the same time, they all get 1Mbit/s, as PCQ dynamically equalizes traffic.
-
-
wissammohamed
Frequent Visitor
- Posts: 85
- Joined:
thanx for everyone whos replay to me
i cearte this rule from this example
http://wiki.mikrotik.com/wiki/PCQ_Examples
[admin@MikroTik] queue> simple print
Flags: X - disabled, I - invalid, D - dynamic
0 name="queue2" target-addresses=192.168.100.0/24 dst-address=0.0.0.0/0 interface=all parent=none direction=both
priority=4 queue=PCQ_upload/PCQ_download limit-at=0/0 max-limit=0/0 total-queue=default-small
this rule divid the BW equaly to my active users
i apply this rule two days ago
when i check my users speed i see that its equal to 60 kps
even if the number of active users is 20 or 10 5 or 1 user
the speed of the active user is equal to 66kps
where is my error in my rule
note i need from this rule to divid the BW equaly to my active users
for ex
my BW is 3m and i have 3 active users
the BW divid to them equaly (each user 1m)
and when one user is active ( he take all the BW)
thanx for everyone
i cearte this rule from this example
http://wiki.mikrotik.com/wiki/PCQ_Examples
[admin@MikroTik] queue> simple print
Flags: X - disabled, I - invalid, D - dynamic
0 name="queue2" target-addresses=192.168.100.0/24 dst-address=0.0.0.0/0 interface=all parent=none direction=both
priority=4 queue=PCQ_upload/PCQ_download limit-at=0/0 max-limit=0/0 total-queue=default-small
this rule divid the BW equaly to my active users
i apply this rule two days ago
when i check my users speed i see that its equal to 60 kps
even if the number of active users is 20 or 10 5 or 1 user
the speed of the active user is equal to 66kps
where is my error in my rule
note i need from this rule to divid the BW equaly to my active users
for ex
my BW is 3m and i have 3 active users
the BW divid to them equaly (each user 1m)
and when one user is active ( he take all the BW)
thanx for everyone
