MikroTik

Hello guys, I'm a noob on this mikrotik stuff, so please bear with me.

My setup is simple. I have a wifi access point connected to the mikrotik. On the wifi AP, I created 2 SSIDs, one intended for guests with separate set of IP address so guests cannot access the internal network. The AP supports VLAN ID. So I set VLAN under the ethernet ETH02 interface in the mikrotik, along with its own DHCP server and pool of different set of IP addresses.

SSID1: private
SSID2: guest
VLAN ID: 100
ETH02: LAN

Devices connected to SSID1 works fine, but devices connected to SSID2 cannot get IP address. Am I missing something?

Post configuration of mikrotik router so we can check if there's something not right.

Post configuration of mikrotik router so we can check if there's something not right.

Sure, if I know what to post. LOL. Serious noob here, first time touching the thing.

From CLI execute command and copy-paste here inside [ code] environment (that's the 7th icon from left - [] ).

Open command console and check output of IP config

What IP address is showing.

Can you confirm the devices you have?? is it
a. mikrotik router with wifi or
b. mikrotik router and a separate mikrotik AP