CRS3xx, vlans from acccess ports to uplink and back..
Posted: Mon Oct 29, 2018 7:30 am
Hello!
Sorry for my bad English.
I want simular sheme:
I did it for untagged ports:
My laptop connected to sfp14 and he get ip-address and work. If i disable rule into "switch" - traffic is blocked. However, i want tagged vlans in access ports. I change rule:
And create vlan interface on laptop. After that i do - "dhclient vlan101" (iface name).. but vlan interface can't get the ip-address...
Is it possible to somehow solve?
Sorry for my bad English.
I want simular sheme:
Code: Select all
vid1 (uplink)
||
-------CRS3xx-------
| | | | |
vid6 vid2 vid3 vid4 vid5
Code: Select all
/interface bridge
add igmp-snooping=yes name=br0 protocol-mode=none vlan-filtering=yes
/interface bridge port
add bridge=br0 interface=sfp-sfpplus16
add bridge=br0 interface=sfp-sfpplus14 pvid=101
add bridge=br0 interface=sfp-sfpplus15 pvid=102
/interface bridge vlan
add bridge=br0 tagged=sfp-sfpplus16 untagged=sfp-sfpplus14 vlan-ids=101
add bridge=br0 tagged=sfp-sfpplus16 untagged=sfp-sfpplus14,sfp-sfpplus15 vlan-ids=1
add bridge=br0 tagged=sfp-sfpplus16 untagged=sfp-sfpplus15 vlan-ids=102
/interface ethernet switch rule
add new-vlan-id=1 ports=sfp-sfpplus14 switch=switch1 vlan-id=101
add new-vlan-id=1 ports=sfp-sfpplus15 switch=switch1 vlan-id=102Code: Select all
add bridge=br0 tagged=sfp-sfpplus16,sfp-sfpplus14 vlan-ids=101Is it possible to somehow solve?