MikroTik

Hello!

I'm trying recovery a RB951, but the NetInstall doesn't load nothing, i just click in Install, but nothing happens.

Bellow a image when i click in install


Now a image after 10s i'd clicked in install


The status of RB back to ready and nothing happens.

My Firewall are off, and antivirus too
Can anyone help me?

Isnt there someone can help me?

try to run netinstall as admin
try another ros version like 6.42.9

Turn windows firewall off. Turn all network security stuff off. Run in Windows XP...reboot and Try that

try to run netinstall as admin
try another ros version like 6.42.9

i do, but not worked too :/

Turn windows firewall off. Turn all network security stuff off. Run in Windows XP...reboot and Try that

the firewall is off, and all network security off too. ill try run as xp compatibility.

I had the same issue. What worked for me was loading a fresh clean install of Windows XP on a laptop with no updates and plugged straight into the router RB2011. After trying Netinstall that way; the install button worked for me. Before that; it was doing the same thing you describe when clicking install.


Sorry, I forgot that there was another variable I had tried; a different version of NetInstall. At first I was using 6.42.5 and it wasn't working then I tried with 6.40.8 and it worked along with the above.

I had the same issue. What worked for me was loading a fresh clean install of Windows XP on a laptop with no updates and plugged straight into the router RB2011. After trying Netinstall that way; the install button worked for me. Before that; it was doing the same thing you describe when clicking install.

ill try it, thanks!

Try plugging a switch between the computer and router board. Firewall off. Set a static ip on your computer. That's how i usually do it with windows 10 and it works.



Sent from my SM-A520W using Tapatalk