I have gotten this router to work for the most part I just cannot get a few things to work correctly. this is what I have or should I say what I want to work

Outside address ether1 nat address ether2
64.173.180.178/32:20-23 (wan-64.173) should goto 212.212.212.11:20-23 tcp (local)
64.173.180.178/32:110 (wan-64.173) should goto 212.212.212.110:110 tcp (local)
64.173.180.178/32:25 (wan-64.173) should goto 212.212.212.110:25 tcp (local)
64.173.180.178/32:5631 (wan-64.173) should goto 212.212.212.115:5631 tcp (local)
64.173.180.178/32:5632 (wan-64.173) should goto 212.212.212.115:5632 udp (local)


64.173.180.182/32:20-23 (wan-64.173) should goto 212.212.212.10:20-23 tcp (local)
64.173.180.182/32:80 (wan-64.173) should goto 212.212.212.10:80 tcp (local)
64.173.180.179/32 (wan-64.173) should goto 212.212.212.15 all (local)
64.173.180.181/32 (wan-64.173) should goto 212.212.212.0 all (local)nat
64.173.180.180/32:4899 (wan-64.173) should goto 212.212.212.1:4899 tcp (local)


Gateway is 64.173.180.177/255.255.255.248 (wan-64.173)
Nat/masq gateway is 212.212.212.254


This is what I have setup

/ip firewall src-nat
add src-address=212.212.212.11/32 action=nat to-src-address=64.173.180.178
add src-address=212.212.212.0/24 action=nat to-src-address=64.173.180.181
add src-address=212.212.212.110/32 action=nat to-src-address=64.173.180.178
add src-address=212.212.212.15/32 action=nat to-src-address=64.173.180.179


/ip firewall dst-nat
add dst-address=64.173.180.178/32 dst-port=20-23 action=nat to-dst-address=212.212.212.11
add dst-address=64.173.180.178/32 dst-port=110 action=nat to-dst-address=212.212.212.110
add dst-address=64.173.180.178/32 dst-port=25 action=nat to-dst-address=212.212.212.110
add dst-address=64.173.180.182/32 dst-port=20-23 action=nat to-dst-address=212.212.212.10
add dst-address=64.173.180.182/32 dst-port=80 action=nat to-dst-address=212.212.212.10
add dst-address=64.173.180.178/32 dst-port=5631 action=nat to-dst-address=212.212.212.115
add dst-address=64.173.180.178/32 dst-port=5632 action=nat to-dst-address=212.212.212.115

this is what I have setup not complete but similar . I can get the 64.173.180.182 and the 64.173.180.178 and 179 telnets to work but failing to get the 64.173.180.180:4899 to work
it is sitting in syn and that’s it same goes for the 64.173.180.178:5631-5632

randy

ether1 is wan 64.173
ether2 is local