Community discussions

MikroTik App
 
zscada
just joined
Topic Author
Posts: 1
Joined: Wed Jan 16, 2019 1:27 pm

R11e-LTE connected to ISP but no Internet

Wed Jan 16, 2019 1:41 pm

We have LtAP mini with R11e-LTE. Firmware 6.43.8 and LTE is "MikroTik_CP_2.160.000_v008".

With one SIM card everything is OK.

With another SIM from different ISP we have problems.
This SIM is ok because it works in other modems like Westermo...

Modem connects to ISP, dinamically we get IP address, default route and DNS server.
DNS server works because when ping(from Mikrotik) google.com DNS is resolved, but timeout.

Firewall and NAT are default and enabled.Doesn't work with firewall off also.

What could be the problem?

You can see picture.

This is part of log...
You do not have the required permissions to view the files attached to this post.
 
User avatar
maddogslo
just joined
Posts: 7
Joined: Thu May 02, 2013 12:48 am

Re: R11e-LTE connected to ISP but no Internet

Fri Aug 30, 2019 10:24 pm

same problem without solution. Reason to not use any Mikrotik LTE device.
 
fbk
just joined
Posts: 1
Joined: Fri Jun 07, 2019 11:09 pm

Re: R11e-LTE connected to ISP but no Internet

Sat Aug 31, 2019 6:48 pm

About this problem.. It was damaged LTE-modem, in my case. I replaced it under warrancy, and all's fine now.
 
User avatar
mudhoney
just joined
Posts: 18
Joined: Fri Jan 19, 2018 10:36 am
Location: Croatia

Re: R11e-LTE connected to ISP but no Internet

Wed Oct 14, 2020 5:31 pm

Damn...I have same problem but on all three (new ones!) R11`s.
Same as yours. Everything looks good but no GW.
Atleast it resloves an IP when I go ping :)

Glad at least someone got it working.
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1888
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: R11e-LTE connected to ISP but no Internet

Mon Oct 26, 2020 12:07 am

General, please not use a R11 only as name but full name R11e-LTE because r11* means few modules now.
That lte module now have a firmware version MikroTik_CP_2.160.000_v018 (know as v18).

In official way you should try do a firmware upgrade by online, probably that cannot be done by that unit itself, if true then you can create a supout.rif after doing this:
https://wiki.mikrotik.com/wiki/Manual:I ... re_upgrade
You can write to support@mikrotik.com for a firmware package with instruction to upgrade it offline by 10$ wwan usb adapter and this should help.

Who is online

Users browsing this forum: No registered users and 10 guests