ros rb4011 2.4g can't be connected by 4 devices?

shiyiqiang08 · Sun Mar 31, 2019 11:56 am

i use my rb4011
but when the 2.4 wireless devices over 4
i cant't connect it any more
why

anav · Sun Mar 31, 2019 4:37 pm

Obviously you need the RB5011.

Wait, let me check my crystal ball............ Its cloudy today can't see much.
I know, my tarot cards are handy........... drats there is cat puke on them, useless.

Hmm I know, post your config
/export hide-sensitive file=yourconfig31mar

shiyiqiang08 · Mon Apr 01, 2019 2:15 pm

Obviously you need the RB5011.
Wait, let me check my crystal ball............ Its cloudy today can't see much.
I know, my tarot cards are handy........... drats there is cat puke on them, useless.

Hmm I know, post your config
/export hide-sensitive file=yourconfig31mar

Thank you very much. My configuration is to configure 20 virtual aps. When I connect to more than four devices, each device connects to a wireless connection, and the latter device can not be connected.

R1CH · Mon Apr 01, 2019 2:33 pm

With 20 virtual APs you are probably destroying the channel with beacons. Make sure to set g/n only or change your data rates.

https://r1ch.net/blog/wifi-beacon-pollution

anav · Mon Apr 01, 2019 6:21 pm

One should realize that stating
i use my rb4011
but when the 2.4 wireless devices over 4
i cant't connect it any more
why?

Is NOT the same situation as I have created 20 virtual WLANS and am having issues with this setup when connecting more than four devices to (a single vLWAN or four different vLWANs etc.)
Draw a diagram as to the network setup and then there will be less confusion!

shiyiqiang08 · Wed Apr 03, 2019 6:57 am

One should realize that stating
i use my rb4011
but when the 2.4 wireless devices over 4
i cant't connect it any more
why?

Is NOT the same situation as I have created 20 virtual WLANS and am having issues with this setup when connecting more than four devices to (a single vLWAN or four different vLWANs etc.)
Draw a diagram as to the network setup and then there will be less confusion!

thank you very much
There is something wrong with my description
I have restored the device, so the configuration is gone, but your description is clear

shiyiqiang08 · Wed Apr 03, 2019 7:00 am

One should realize that stating
i use my rb4011
but when the 2.4 wireless devices over 4
i cant't connect it any more
why?

Is NOT the same situation as I have created 20 virtual WLANS and am having issues with this setup when connecting more than four devices to (a single vLWAN or four different vLWANs etc.)
Draw a diagram as to the network setup and then there will be less confusion!

four different vLWANs

ros rb4011 2.4g can't be connected by 4 devices?

ros rb4011 2.4g can't be connected by 4 devices?

Re: ros rb4011 2.4g can't be connected by 4 devices?

Re: ros rb4011 2.4g can't be connected by 4 devices?

Re: ros rb4011 2.4g can't be connected by 4 devices?

Re: ros rb4011 2.4g can't be connected by 4 devices?

Re: ros rb4011 2.4g can't be connected by 4 devices?

Re: ros rb4011 2.4g can't be connected by 4 devices?

Who is online