Hotspot bypass for "client side" IPs

jsuter · Fri Mar 30, 2007 9:39 am

I have a block of private addresses I would like to completely 'bypass' hotspot mode with. This block is for administrative access of far-end repeater RouterOS boxes, and is firewalled from being able to do anything 'bad' on our network or the internet so I'm not exactly concerned about people 'discovering' the IP block otherwise.

Is there any easy way to get it to bypass an address block?

thanks!

gustkiller · Sun Apr 01, 2007 12:50 am

i have same problem here a some /24 blocks that i would like to bypass completely not one by one .. that is a real pain to do!

jo2jo · Sun Apr 01, 2007 7:44 am

this *may* work

go to IP-> hotspot. and then ip bindings: add and type "bypass"

just do /24 and no mac addy..

post if it works..i have other ideas if this does not work

pam · Wed May 09, 2007 4:29 pm

Ip-bindings but /24 wont work, just type a range in addres

ex

192.168.0.1-192.168.0.10

That will bypass the auth for 10 ip's

Rregards

balimore · Wed May 09, 2007 5:20 pm

---
yes, friend .....
do this from CLI telnet or mac-telnet,
this subnet complete /24

/ip ho ip-bi add address=192.168.0.0/24 type=bypa

this selection 5 addresses only

/ip ho ip-bi add address=192.168.0.11-192.168.0.15 type=bypa

regards
Hasbullah.com
---

Hotspot bypass for "client side" IPs

Hotspot bypass for "client side" IPs

Who is online