Page 1 of 1
RB3011 Show LTE in Quickset
Posted: Tue May 28, 2019 5:17 pm
by FHM
Hi
I have put USB LTE in my RB3011 and I have removed now, but the Quickset still show LTE in it and "ethernet" option disappear and no more option in it, only LTE
Thanks All
Re: RB3011 Show LTE in Quickset
Posted: Thu May 30, 2019 8:34 am
by krafg
Reboot and try again.
Regards.
Re: RB3011 Show LTE in Quickset
Posted: Thu May 30, 2019 11:26 am
by FHM
Reboot and try again.
Regards.
Thanks for reply
Nothing happened, the problem still exists
Re: RB3011 Show LTE in Quickset
Posted: Thu May 30, 2019 2:00 pm
by mkx
How about factory reset?
Re: RB3011 Show LTE in Quickset
Posted: Thu May 30, 2019 6:16 pm
by FHM
How about factory reset?
No I don't want to make a factory reset, because there are many settings I do it in RB
There is a problem and factory reset is not a solution
Re: RB3011 Show LTE in Quickset
Posted: Thu May 30, 2019 7:21 pm
by 3liswaid
i have the same problem
my router is hEX
Note that: my friend also has a hEX and the problem didn't appear for him..
i believe that that problem has appeared after i connect my phone to the router and enabled the Tethering.
Re: RB3011 Show LTE in Quickset
Posted: Thu May 30, 2019 8:25 pm
by FHM
i have the same problem
my router is hEX
Note that: my friend also has a hEX and the problem didn't appear for him..
i believe that that problem has appeared after i connect my phone to the router and enabled the Tethering.
The problem appears if a phone is connected via a USB connection, and activating the phone as a LTE modem or connecting a USB LTE modem dongle
Re: RB3011 Show LTE in Quickset
Posted: Thu May 30, 2019 10:52 pm
by mkx
How about factory reset?
No I don't want to make a factory reset, because there are many settings I do it in RB
There is a problem and factory reset is not a solution
If you have many custom settings, then you should most definitely
not use quickset. If you can still sensibly change settings using quick set, then ... you don't have that many settings after all.
Re: RB3011 Show LTE in Quickset
Posted: Fri May 31, 2019 5:23 pm
by FHM
How about factory reset?
No I don't want to make a factory reset, because there are many settings I do it in RB
There is a problem and factory reset is not a solution
If you have many custom settings, then you should most definitely
not use quickset. If you can still sensibly change settings using quick set, then ... you don't have that many settings after all.
I'm sorry but reset is not a solution
Re: RB3011 Show LTE in Quickset
Posted: Fri May 31, 2019 5:37 pm
by jlp16400
Hi,
I have the same problem on my RB3011uias....
Re: RB3011 Show LTE in Quickset
Posted: Fri May 31, 2019 5:47 pm
by Cha0s
If you have many custom settings, then you should most definitely not use quickset. If you can still sensibly change settings using quick set, then ... you don't have that many settings after all.
I'm sorry but reset is not a solution
Then you shouldn't use Quickset.
Quickset is only for initial setup of a device. If you do custom configuration afterwards then you will only get problems with Quickset.
Re: RB3011 Show LTE in Quickset
Posted: Mon Jun 03, 2019 4:04 pm
by Steveocee
Unhelpfully I'll echo the above. If the device is up and running and you can't bare to lose the config.
1)Back up your config NOW
2)Make changes manually and don't use quickset again
3)If you mess it up badly at least you have a backup now.
WInBox Shuts down whenever I click on Quickset
Posted: Tue Jun 25, 2019 12:47 pm
by Chiditron
I have a Mikrotik RB951Ui-2HnD Indoor Wireless Router and I installed winbox.
However, whenever I login to my winbox and click on Quickset to configure my network, the winbox shuts down.
How do I congigure my router without quickset
I need ideas please.
CHiditron
Re: WInBox Shuts down whenever I click on Quickset
Posted: Fri Jun 28, 2019 12:48 pm
by Steveocee
I have a Mikrotik RB951Ui-2HnD Indoor Wireless Router and I installed winbox.
However, whenever I login to my winbox and click on Quickset to configure my network, the winbox shuts down.
How do I congigure my router without quickset
I need ideas please.
CHiditron
Maybe try this
posting.php?mode=post&f=13