Community discussions

MikroTik App
 
User avatar
mohannad
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 55
Joined: Wed May 02, 2012 2:39 am
Location: Lebanon
Contact:

PPPOE Disconnect Client

Fri Jul 26, 2019 1:39 pm

Hello I have A serious issue
i have 1036CCR with around 700 PPPOE active client
once there is a sudden disconnect for more then 300-400 client at once
the CCR jam and start send disconnect request in the log while the clients tryoing to reconnect
the internet disconnect
ping on server delay time out and high delay respond
between 4-8 mints until the situation goes back normal
in the log shows all clients disconnected and reconnect all at once
no cpu usage cpu is normal 10%<
in the profile no resources is using cpu
in the firewall there is no nat
i use static route from the core router
i tried to decrease the number of clients by dividing the clients on 2 CCR
now i have 350 pppoe client connected on each and still have the same issue with less time 5 Mint<
i need help please
 
User avatar
victorsoares
Member Candidate
Member Candidate
Posts: 106
Joined: Thu Feb 15, 2018 6:29 pm
Location: Ubatuba, São Paulo - Brazil
Contact:

Re: PPPOE Disconnect Client

Fri Jul 26, 2019 5:59 pm

Can you post your ppp server settings and interfaces so we have a better understanding of what might be going on?
 
ahmadff
just joined
Posts: 4
Joined: Tue Jul 17, 2018 9:58 am

Re: PPPOE Disconnect Client

Mon Jul 29, 2019 9:06 pm

i have the same problem you have to delete all rules on firewall> nat including hotspot dynamic rules the problem will be solved
But that means you cant use hotspot and ppp on same mikrotik
any other ideas ?

Who is online

Users browsing this forum: gianry, ieleja, MoviNET08, romrider and 38 guests