Mikrotik | BGP Brocade| Public ip assign | Traffic shaping |
Posted: Sat Dec 14, 2019 2:16 pm
Hi there
im new to the forum (writing for first time)
Im using mikrotik daily but have to say that still learning everyday new things
I would like to ask for some help if possible
I have the following situation I have at work brocade netiron BGP with 4 networks from ripe advertised /24 dhcp disabled
After which is the switch and then the mikrotik
Current configuration is bgp- > switch -> mikrotik -> wan and lan bridged ,all ip ranges added to ip -> adresses ,dhcp server serving to bridge,and 4 couple pools with the ranges
At the moment this configuration is working fine for 1 year but i started to look for the right way to configure the mikrotik after the bgp
With this configuration i cant use queues
tried to play with proxy arp ,no bridge and routes and managed to see finally traffic goinf through the queue .
My goal is to configure the mikrotik properly cause from time to time the BGP netiron starts to act weird like fire alerts and stops the internet i mean mikrotik leases ips but no internet
After reboot the internet starts working again
Im sure that this is totaly wrong way to configure router after bgp but i will be very thankfull for your opinion and comments how i can do it properly
Kind Regards Mitko
im new to the forum (writing for first time)
Im using mikrotik daily but have to say that still learning everyday new things
I would like to ask for some help if possible
I have the following situation I have at work brocade netiron BGP with 4 networks from ripe advertised /24 dhcp disabled
After which is the switch and then the mikrotik
Current configuration is bgp- > switch -> mikrotik -> wan and lan bridged ,all ip ranges added to ip -> adresses ,dhcp server serving to bridge,and 4 couple pools with the ranges
At the moment this configuration is working fine for 1 year but i started to look for the right way to configure the mikrotik after the bgp
With this configuration i cant use queues
tried to play with proxy arp ,no bridge and routes and managed to see finally traffic goinf through the queue .
My goal is to configure the mikrotik properly cause from time to time the BGP netiron starts to act weird like fire alerts and stops the internet i mean mikrotik leases ips but no internet
After reboot the internet starts working again
Im sure that this is totaly wrong way to configure router after bgp but i will be very thankfull for your opinion and comments how i can do it properly
Kind Regards Mitko