MikroTik

Posted: **Tue Dec 31, 2019 3:53 pm**

Hello,

Happy new year to everybody.

I have a simple (possible stupid) question.
I have a router doing capsman + hotspot, and have some metal 52Ac and Cap Ac doing Access points.

My capsman config has 2.4G and 5G config. All ok and working nicely on the Cap AC, but on the metal 52AC i would like to only use 2.4G, but for some reason it picks the 5G,

How can i make the metal 52 Ac have the 2.4Ghz instead of the 5Ghz? (it only has one interface).

Thanks in advance.

Posted: **Tue Dec 31, 2019 4:40 pm**

This model if i remember right has software selectable band...
I ve seen recently another post with the same problem but i do not really remember if a solution was found...

Posted: **Sat Jan 04, 2020 1:15 pm**

Thanks,

I have searched and have not yet found a solution.

If any one could help, would apreciate it.

Posted: **Sat Jan 04, 2020 3:57 pm**

Hi.
Have you tried to add adicional "configuration" and apply this to the AP with a specific "provisioning" rule with the MAC of Metal AC ?

Posted: **Sat Jan 04, 2020 7:48 pm**

Take a look here viewtopic.php?f=7&t=154940 same problem and my solution worked...

Posted: **Sun Jan 05, 2020 1:03 pm**

Thks

Not ideal but works.

Posted: **Sun Jan 05, 2020 9:02 pm**

Not ideal but works

If you find a better one, let me know...

MikroTik

Capsman 2.4G and 5Ghz.

Capsman 2.4G and 5Ghz.

Re: Capsman 2.4G and 5Ghz.

Re: Capsman 2.4G and 5Ghz.

Re: Capsman 2.4G and 5Ghz.

Re: Capsman 2.4G and 5Ghz. [SOLVED]

Re: Capsman 2.4G and 5Ghz.

Re: Capsman 2.4G and 5Ghz.