Hi Guys!
I have bought kit RBLHGG-60ad (master and slave device). I have sucessfully paired them and been using short time. (devices already mounted, approx 300m between) After it I have upgraded FW to 6.46.1 (stable). I was doing some config on master side, my config was not OK, so I decied to reset it to start form the scratch.

Everything went good, I have performed reset via mac telnet (I was having some troubles to connect via IP ddress, but was able to sucessfull connect via mac telnet). On "master device" I have perfomed command system reset-configuration. It went OK, but accourding to my suprprise my Mikrotik received 192.168.88.3 instead of 192.168.88.2 that is on the sticker.
(I think 192.168.88.3 = slave and 192.168.88.2 = master). And Iam not able to login to my device anymore. Iam using admin as username and password from the sticker. It is not working. Iam all the time receiving message "wrong username or password"
Tried:
- several version of WinBox (including latest 3.20 64bit)
- user admin, blank password, user admin my previous password
- turn off and on the device form the power source
- login via Winbox, SSH, telnet and web

Any sugestion what can be wrong and why?

Thanks in advance.