hi
I buy one omnitik 5 ac and 4 units of SXT 5 ac. pluged in poe in 1st port of omnitik and its works fine, but when i pluged the eathernet cable (1 meter) from omnitik to SXT 5 there is no Power ,
try all 4 sxt units and its same no power, but if i plug poe direct from adapter sxt works fine.running latest ROS , and powering omnitik with 48v 2A cisco power adapter. please help to sort this out.

There is two different models, did you purchase the poe model?

Sent from my SM-A520W using Tapatalk

There is two different models, did you purchase the poe model?

Sent from my SM-A520W using Tapatalk

Really i was not aware of that how i can check that ?

Please help me .

how i can identify that i have poe version or not , because on mikrotik website manual says omnitik is with poe output.

By the name/product code - /system routerboard print
RBOmniTikU-5HnD - OmniTIK 5 whitout PoE
RBOmniTikUPA-5HnD - OmniTIK 5 PoE with PoE
RBOmniTikG-5HacD - OmniTIK 5 ac whitout PoE
RBOmniTikPG-5HacD OmniTIK 5 PoE ac with PoE

By the name/product code - /system routerboard print
RBOmniTikU-5HnD - OmniTIK 5 whitout PoE
RBOmniTikUPA-5HnD - OmniTIK 5 PoE with PoE
RBOmniTikG-5HacD - OmniTIK 5 ac whitout PoE
RBOmniTikPG-5HacD OmniTIK 5 PoE ac with PoE

i was not aware of this thing so i buy
RBOmniTikG-5HacD - OmniTIK 5 ac whitout PoE
is there any solution or i have to put a jumper from Poe in to lan ports for power up my SXT 5ac units.

By the name/product code - /system routerboard print
RBOmniTikU-5HnD - OmniTIK 5 whitout PoE
RBOmniTikUPA-5HnD - OmniTIK 5 PoE with PoE
RBOmniTikG-5HacD - OmniTIK 5 ac whitout PoE
RBOmniTikPG-5HacD OmniTIK 5 PoE ac with PoE

i was not aware of this thing so i buy
RBOmniTikG-5HacD - OmniTIK 5 ac whitout PoE
is there any solution or i have to put a jumper from Poe in to lan ports for power up my SXT 5ac units.

Send back and buy needed device

I have put jumpers on the 100 megabit ethernet on original Omnitiks. pin 4,5,7,8 on ethernet are unused by data no problems.
The omnitik ac have 1 gigabit ethernet connections all 8 pins used for data. the jumpers would be on the ethernet transformers if possible.
I think if you can send back unit that would be best. Live and Learn.

Please help me .

how i can identify that i have poe version or not , because on mikrotik website manual says omnitik is with poe output.

Even easier is to examine ports 2-5 -- if they have a yellow border on the label, they provide POE, otherwise, they do not. True of all MT products.