Community discussions

MikroTik App
  4. RouterOS
  5. Beginner Basics

[SOLVED] LAN Traffic not going into the configured Tunnel

Post Reply
 
Maillouski
just joined
Topic Author
Posts: 21
Joined: Fri Apr 24, 2020 1:50 am

[SOLVED] LAN Traffic not going into the configured Tunnel

Wed Apr 29, 2020 8:36 pm

I have followed this how-to on how to setup my VPN tunnel : https://www.vpnunlimitedapp.com/help/ma ... setup#id27
But I think their instructions are incorrect/outdated. Even though I configured the marking, something does not make sense and indeed, the traffic does not go through the tunnel.

Can someone help me understanding what is not correct in their example ? I am running 6.46.5,
The Tunnel is Active, so that part works.
Code: Select all
Flags: X - disabled, D - dynamic, R - responder 
 0     name="VPNUnlimited" address=192.99.7.170/32 profile=VPNUnlimited exchange-mode=ike2 send-initial-contact=yes
Top
 
Maillouski
just joined
Topic Author
Posts: 21
Joined: Fri Apr 24, 2020 1:50 am

Re: [SOLVED] LAN Traffic not going into the configured Tunnel

Wed May 06, 2020 12:19 am

Well, it turns out their instructions are wrong. The Mangle Rule should mark SRC address and not DST address.
Top
 
User avatar
grumpazoid
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Tue Nov 19, 2019 1:32 pm

Re: [SOLVED] LAN Traffic not going into the configured Tunnel

Thu Jan 20, 2022 8:33 pm

I just tried this today and the same error is still on their instructions. Luckily I thought it looked wrong and it was a quick fix.
Top
Post Reply
  4. RouterOS
  5. Beginner Basics