MikroTik

this will be my first time using 60ghz PTMP, I am setting up a new site (tower) wich get linked to one of towers by LHG60-AD,and I will deply at least two RBWAPG-60AD-A, I mean

but first I have some questions
RBWAPG-60AD-A , have a licence level 4...wich support PTMP links


1. do I need to use 3 different channels of 60ghz band to avoid overlapping frecuencies?

2. It is not clear to me if I can connect clients at a 180 degree angle or a 60 degree angle only in each RBWAPG-60AD-A

2. is it compatible with RBSXTSQ-60AD as CPE? (I understand is discontinued but there are some ready to buy in my country)

3. What maximum distance would you reach with a combination of these radios RBWAPG-60AD-A and RBSXTSQ-60AD?

4. How many maximum clients can I connect per AP RBWAPG-60AD-A ?

5. Some of my clients would be up to 150 meters away, but I only need to deliver between 50mbps and 100mbps to each client, no more it's possible?

6. I intend to connect 1 omnitik with the 5 POE ports, to use it as an outdoor POE switch, and this omnitik should power 1xLHGG-60ad, 2xRBWAPG-60AD-A. it's possible?



Thanks for the comments, any help or consideration that I am forgetting would be very appreciated by me and it would be very helpful

this will be my first time using 60ghz PTMP, I am setting up a new site (tower) wich get linked to one of towers by LHG60-AD,and I will deply at least two RBWAPG-60AD-A, I mean

but first I have some questions
RBWAPG-60AD-A , have a licence level 4...wich support PTMP links


1. do I need to use 3 different channels of 60ghz band to avoid overlapping frecuencies?

You have 4 channels so there is no reason to overlap frequencies, lower channels for PtMP higher channels for PtP

2. It is not clear to me if I can connect clients at a 180 degree angle or a 60 degree angle only in each RBWAPG-60AD-A

uffically is 60° really close to 180°

2. is it compatible with RBSXTSQ-60AD as CPE? (I understand is discontinued but there are some ready to buy in my country)

yes

3. What maximum distance would you reach with a combination of these radios RBWAPG-60AD-A and RBSXTSQ-60AD?

200m

4. How many maximum clients can I connect per AP RBWAPG-60AD-A ?

8 limited by chipset

5. Some of my clients would be up to 150 meters away, but I only need to deliver between 50mbps and 100mbps to each client, no more it's possible?

you can deliver 200 Mb/S or more

6. I intend to connect 1 omnitik with the 5 POE ports, to use it as an outdoor POE switch, and this omnitik should power 1xLHGG-60ad, 2xRBWAPG-60AD-A. it's possible?

yes

Thnak you for your help!!