Hello together, I have a new CRS328-24P-4S+RM board, which I would like to use only as as Switch, for this purpose I changed from RouterOS to SwitchOS. After Reboot I could access from my client via Ethernet and static IP Range like the board to 192.168.88.1 and opened the Webinterface of SwitchOS. Afterwards I changed the DHCP configuration I think from default DHCP with fallback to DHCP only and restarted the board, to take the new IP address from the main central router/modem which already have a DHCP server....but after the reboot I could not get connected, because the WinBox windows show up under Neighbors my Board with a MAC address, but without an IP address = 0.0.0.0 !!! In the colum Version the SwitchOS runs with an older version 2.7, after that I looked into the current Changelog 2.12 (https://mikrotik.com/download) of SwitchOS which after my version there were many DHCP errors fixed...
Anyway, how can I get connected back to SwitchOS to make an Upgrade 2.12, maybe the DHCP problem will be fixed, because I can´t connect via MAC-address, because SwitchOS is running :-((((
Please Help, that´s my first Mikrotik Hardware
Re: Problem to access CRS328 with SwOS and IP 0.0.0.0
Hello together,
I already found the same problem which someone had here: viewtopic.php?t=143970
Before I send the new device back, could someone help me to access the device to update SwOS?
In the attachments you can see my WinBox Neighbours Tab with the found device: Is it impossible to get connected for administration?? Could you give an tutorial how to connect via Ethernet or should I buy a special Console Cable (RJ45 to USB) ?
I already found the same problem which someone had here: viewtopic.php?t=143970
Before I send the new device back, could someone help me to access the device to update SwOS?
In the attachments you can see my WinBox Neighbours Tab with the found device: Is it impossible to get connected for administration?? Could you give an tutorial how to connect via Ethernet or should I buy a special Console Cable (RJ45 to USB) ?
You do not have the required permissions to view the files attached to this post.
Re: Problem to access CRS328 with SwOS and IP 0.0.0.0
SOLUTION: Buy a Serial Console Cable (RJ45 to USB) and plug into your PC and use Putty as client to connect via Console Cable, then reset your configs:
Choose "r - reset configuration"
https://wiki.mikrotik.com/wiki/SwOS/CRS ... _Reinstall
After the reset and a reboot, I could get connected to SwitchOS with the Fallback IP 192.168.88.1 and then I Upgraded the System from 2.7 to 2.12 with the previous downloaded binary file. The Upgrade solves the problem to get an IP of my DHCP server, hope it helps you.
Choose "r - reset configuration"
https://wiki.mikrotik.com/wiki/SwOS/CRS ... _Reinstall
After the reset and a reboot, I could get connected to SwitchOS with the Fallback IP 192.168.88.1 and then I Upgraded the System from 2.7 to 2.12 with the previous downloaded binary file. The Upgrade solves the problem to get an IP of my DHCP server, hope it helps you.