PIM on sigle router

sourianos86 · Mon Jan 18, 2021 10:19 pm

Hallo all. I want to use mikrotik as igmp querier, at networtk i have 4 iptv streamers connected on ccr1016 port 5-8, and seperate vlan300 for tv, this vlan is untugged on managment switches on tv ports with igmp snooping enable .
On mikrotik i have enable pim on interface 5-8 and vlan300 i have make one bridge loopback with ip 10.0.0.1 and i use it on pim rp for group 224.0.0.0/4
is this config enough to use ccr1016 as querier?
Sorry for my english and thanks advance.

/routing pim interface
add interface=ether5
add interface=ether6
add interface=ether7
add interface=ether8
add interface=vlan300_iptv
/routing pim rp
add address=10.0.0.1