Page 1 of 1
Activate wps
Posted: Wed Mar 03, 2021 4:36 pm
by Theking2
in /interface wireless print I don't see wps-mode listed. How do I, temporarily, activate wps?
RouterOS 6.46.7 / Mikrotik hAP
Re: Activate wps
Posted: Wed Mar 03, 2021 5:43 pm
by WeWiNet
In Winbox, under wireless tab, there is a button "WPS accept", press that one.
(assuming you allow WPS for the interface).
Make sure you press the "advanced mode" first to see WPS parameters.
Some routerboards also have a button or joint wps/reset button one can use...
Re: Activate wps
Posted: Tue Mar 09, 2021 12:13 am
by Theking2
In Winbox, under wireless tab, there is a button "WPS accept", press that one.
(assuming you allow WPS for the interface).
Make sure you press the "advanced mode" first to see WPS parameters.
Some routerboards also have a button or joint wps/reset button one can use...
clicking WPS accept seems to do nothing.
Where is "advanced mode"?
Re: Activate wps
Posted: Mon Nov 15, 2021 11:47 am
by Theking2
Found the advanced options.
I can only specify an SSID.Will it find the WPA2 PSK automatically?
Re: Activate wps
Posted: Wed Nov 17, 2021 12:57 pm
by Rugx
Found the advanced options.
I can only specify an SSID.Will it find the WPA2 PSK automatically?
WPA2-PSK etc.. settings can be found within the wireless security profile. If you're creating a new one, set it afterwards on the wireless interface as well.