MikroTik

Posted: **Sun Apr 25, 2021 2:21 pm**

Is it possible to connect two same subnets (as per diagram) to the same Server? In the event that you cannot change a client's subnet (but you still need to connect it to that Server), how do you deal with establishing that link between all three (2 clients and 1 server) ? And then... e.g. be able to connect to either, from a same third OR different ( 192.168.50.1/24) client subnet?

Thank you in advance!

Posted: **Sun Apr 25, 2021 4:19 pm**

Have a look at action=netmap in /ip firewall nat. It's the best you can have, with some drawbacks of course - it's still NAT.

Posted: **Fri May 14, 2021 3:56 pm**

Thank you Sindy !

Posted: **Fri May 14, 2021 4:01 pm**

Hello,

Take a look at this wonderful tip : viewtopic.php?t=148665

It works great :)

MikroTik

Same subnets to L2TP/IPsec, possible?

Same subnets to L2TP/IPsec, possible?

Re: Same subnets to L2TP/IPsec, possible?

Re: Same subnets to L2TP/IPsec, possible?

Re: Same subnets to L2TP/IPsec, possible?