Page 1 of 1
How to view devices hardwired to the router by IP address?
Posted: Wed Sep 08, 2021 9:51 pm
by routerrooter
I had previously asked a question about finding wireless devices on the network, which was solved, and now I am trying to get a list of the devices physically connected to the router, as well as the IP address assigned to each. I can't see to find this in the settings of my router. Can someone point me in the right direction?
Re: How to view devices hardwired to the router by IP address? [SOLVED]
Posted: Wed Sep 08, 2021 10:50 pm
by gabacho4
Believe this is what you’re looking for?
In WinBox, go to IP then DHCP server then leases. That will show anything connected via DHCP.
Re: How to view devices hardwired to the router by IP address?
Posted: Thu Sep 09, 2021 1:17 am
by iaskakho
[iaskakho@gateway1] /ip arp> print
Flags: X - disabled, I - invalid, H - DHCP, D - dynamic, P - published, C - complete
# ADDRESS MAC-ADDRESS INTERFACE
0 DC 10.0.2.8 74:8D:08:91:12:1D bridge
1 DC 10.0.2.71 90:81:58:F3:91:DB bridge
2 DC 10.0.2.48 98:E7:43:7F:47:32 bridge
3 DC 10.0.2.2 00:E0:4C:12:13:C6 bridge
4 DC 10.0.2.85 A8:82:00:86:14:55 bridge
5 DC 10.0.2.110 A8:23:FE:3D:5F:FC bridge
6 DC 10.0.2.61 E0:61:B2:05:D4:6A bridge
7 DC 10.0.2.15 50:3F:56:01:AF:1E bridge
8 DC 7.68.184.1 3E:8A:B0:38:0A:14 ether2
9 DC 10.0.2.144 96:57:02:B9:70:93 bridge
10 DC 10.0.2.141 14:7D:DA:C5:C5:C1 bridge
11 DC 10.0.2.40 E0:F6:B5:9B:20:B6 bridge
If you want to see which physical port the ip is coming from you can:
[iaskakho@gateway1] /ip arp> /interface bridge host print
Flags: X - disabled, I - invalid, D - dynamic, L - local, E - external
# MAC-ADDRESS VID ON-INTERFACE BRIDGE AGE
0 D 00:07:4D:42:4D:9C ether4 bridge 55s
1 D 00:E0:4C:12:13:C6 ether6 bridge 1s
2 D 14:7D:DA:C5:C5:C1 wlan1 bridge 2s
3 DL 2C:C8:1B:90:33:A8 bridge bridge
4 DL 2C:C8:1B:90:33:A9 ether3 bridge
5 DL 2C:C8:1B:90:33:AA ether4 bridge
6 DL 2C:C8:1B:90:33:AB ether5 bridge
7 DL 2C:C8:1B:90:33:AC ether6 bridge
8 DL 2C:C8:1B:90:33:B0 ether10 bridge
9 DL 2C:C8:1B:90:33:B2 wlan1 bridge
10 D 48:8F:5A:FA:FF:0A ether10 bridge 22s
11 D 50:3F:56:01:AF:1E ether4 bridge 0s
Re: How to view devices hardwired to the router by IP address?
Posted: Thu Sep 09, 2021 8:12 pm
by routerrooter
Believe this is what you’re looking for?
In WinBox, go to IP then DHCP server then leases. That will show anything connected via DHCP.
Excellent, this is exactly what I was looking for! Interestingly it also shows the list of all devices connected to the AP's, not just those connected (wired) to the router. Thanks for the help.