Hi, my router after update rebooting after 10 seconds... after a few blink of eth...
I triede to reset /30 seconds pressing wile power on... it blink wlan1&wlan2 ... I think made the reset...

But nothing... what can I do?

Did you upgrade the firmware too ?

Not ... only sw upgrade (from quick setup)

30 seconds are too much...
I don't think you actually reset the device.
Apply power to the device and then press the reset directly, when the user led starts flashing release the reset button.

Also you could try pressing the reset button before applying power, and then apply power with the reset already pressed. That will load the backup bootloader as well ...

I'v been tried to shortly while powered on... 10 secs, it was blinking (the LEDs of 5ghz and 2ghz) rapidly.
tried to press wile booting up same shortly blinking the wlan LEDs.

But same sympthome..

But is younger then 6 months...

Ps. Thre are 5 LEDs.
Green ones: 5ghz, 2ghz, eth, caps, pwr

I've been tried the netinstall - I made like this at first time...
(After many try and two computer) The router could connected to the netinstall app.
I downloaded many pack and installer (6.49 & 6.48.5 too).. When I choose (RBwAPG-5HacT2HnD) the router the package window gose to empty.

Is anybody knows what package do I need to Netinstall? I would be thankful for a direct link.