MikroTik

For some reason the DHCP client on my hAP mini stopped working on 7.1rc6 and I lost any ability to connect to it, even though all the clients connected to it (both ethernet and wlan) had access to the internet.
I reset the router using the hardware button, set up my configuration again, and then saw that 7.1 is released, so I upgraded to that.
After update I noticed terminal is very slow, it takes about 2-3 seconds after starting it for it to become interactive and autocomplete is very slow as well.
I did /export , and the export takes a very long time printing lines very slowly, then stops after /ip pool and becomes unresponsive. Did the same thing over SSH, and the same thing happened, export stopped after /ip pool. Then I did the same thing but trying to export the config to a file. This also never finishes and leaves a ".in_progress file".
Under resource monitor I can see CPU is hammered 100% for about 15 seconds after executing /export, but after a while it goes back to 0-1-2% even though the export doesn't ever finish.

same here.

one of many v7 bugs, probably

Export RouterOS 7.1 on:
SXT 5HPnD r2 (600Mhz) slow
SXT 5HPnD (400Mhz) weeeeery slow.
Some time when logging in on the 400MHz I do get "Console has crashed; please log in again."

Edit:
When trying to export the config from SXT 5HPnD (400Mhz), it does loos its client and Winbox may be disconnected (connected using cable)

Export RouterOS 7.1 on:
SXT 5HPnD r2 (600Mhz) slow
SXT 5HPnD (400Mhz) weeeeery slow.
Some time when logging in on the 400MHz I do get "Console has crashed; please log in again."

Edit:
When trying to export the config from SXT 5HPnD (400Mhz), it does loos its client and Winbox may be disconnected (connected using cable)

same here. please fix it, mikrotik

For some reason the DHCP client on my hAP mini stopped working on 7.1rc6 and I lost any ability to connect to it, even though all the clients connected to it (both ethernet and wlan) had access to the internet.
I reset the router using the hardware button, set up my configuration again, and then saw that 7.1 is released, so I upgraded to that.
After update I noticed terminal is very slow, it takes about 2-3 seconds after starting it for it to become interactive and autocomplete is very slow as well.
I did /export , and the export takes a very long time printing lines very slowly, then stops after /ip pool and becomes unresponsive. Did the same thing over SSH, and the same thing happened, export stopped after /ip pool. Then I did the same thing but trying to export the config to a file. This also never finishes and leaves a ".in_progress file".
Under resource monitor I can see CPU is hammered 100% for about 15 seconds after executing /export, but after a while it goes back to 0-1-2% even though the export doesn't ever finish.

I've got exactly the same issue with the hAP-mini. But mysteriously, it is not happening with mAP lite, which I think it shares CPU (but different architecture)
Anyone knows if that's the correct place for reporting this kind of issues, or any other we find out in 7.1 ?

Thanks.

NM...

Same issue on a hAP lite with a fairly minimal configuration.

Upgraded from 6.48.6 to 7.1 by selecting upgrade channel in System > Packages. Export stalls after emitting the /ip dhcp-server section, the next would be /interface bridge port under v6.

Edit: If left in this state for some time the following messages appear in the terminal window followed by more of the export:
#error exporting /mpls/traffic-eng/path
#error exporting /routing/bgp/template
#error exporting /routing/pimsm/instance

Stalls again after /interface ovpn-server server, next would be /ip address. Continues after the following message:
#error exporting /interface/vpls/bgp-vpls

And again after /ipv6 nd, next would be /system clock. Continues after the following messages:
#error exporting /mpls/interface
#error exporting /mpls/ldp
#error exporting /mpls/ldp/accept-filter
#error exporting /mpls/ldp/advertise-filter
#error exporting /mpls/ldp/interface
#error exporting /mpls/ldp/local-mapping
#error exporting /mpls/ldp/neighbor
#error exporting /mpls/ldp/remote-mapping
#error exporting /mpls/traffic-eng/interface
#error exporting /mpls/traffic-eng/tunnel
#error exporting /routing/bgp/connection
#error exporting /routing/bgp/vpn
#error exporting /routing/pimsm/bsr/candidate
#error exporting /routing/pimsm/bsr/rp-candidate
#error exporting /routing/pimsm/interface-template
#error exporting /routing/pimsm/static-rp

Eventually finished well over 2 hours later!

Possibly something to do with MPLS and routing packages not previously being present, to save space only some individual packages were installed. Log from upgrade:
jan/02/1970 00:00:23 system,error broken package ppp-7.1-smips.npk
jan/02/1970 00:00:23 system,error broken package security-7.1-smips.npk
jan/02/1970 00:00:23 system,error broken package wireless-7.1-smips.npk
jan/02/1970 00:00:23 system,error broken package advanced-tools-7.1-smips.npk
jan/02/1970 00:00:23 system,error broken package dhcp-7.1-smips.npk
jan/02/1970 00:00:23 system,error broken package ipv6-7.1-smips.npk
jan/02/1970 00:00:23 system,info installed system-7.1
jan/02/1970 00:00:23 system,info crossfig will upgrade version 6 configuration
jan/02/1970 00:00:23 system,info router rebooted

Issue is still present in 7.1.1 and 7.2rc1

I got the same issue in a hAP lite (RouterBOARD 941-2nD) on 7.1.1 (Dec/21/2021 11:53:05)

It starts the export and on some point it freezes.
Has no problem with: /system/backup
If a do a "Make supout.rif" the export section is empty. (viewed with https://mikrotik.com/client/supout)

With another device, a cAP ac (RBcAPGi-5acD2nD) this problem is not happening with 7.1.1

I got the same issue in a hAP lite (RouterBOARD 941-2nD) on 7.1.1 (Dec/21/2021 11:53:05)

It starts the export and on some point it freezes.

Works ok with v7.2rc3, perhaps it is fixed in v7.2rc2 (2022-Jan-28):
*) route - fixed routing configuration export on SMIPS devices;

I got the same issue in a hAP lite (RouterBOARD 941-2nD) on 7.1.1 (Dec/21/2021 11:53:05)

It starts the export and on some point it freezes.

Works ok with v7.2rc3, perhaps it is fixed in v7.2rc2 (2022-Jan-28):
*) route - fixed routing configuration export on SMIPS devices;

That's great news, time to see if my hap lites will do what I need on 7.2rc3.
Edit, no they are still hanging and not accessible until rebooted.

Anyone else testing 7.2rc5 on their SMIPS device?

My web interface will not load
DNS is failing to resolve
About to test export
took 30 seconds.
export verbose has a lot of things enabled that I do not need.

Any updates on this?

Could this issue maybe be related to this one viewtopic.php?t=170883 ?

Difficult to say, I have one running v7.2 which idles at around 5% when showing interfaces and resources in Winbox. Exporting a near factory-default configuration does now complete, but takes around 2 minutes at 100% CPU and wlan connections will sometimes disconnect.

Upgrading to 7.2.1 eventually worked after a critical error and another wlan disconnection:
Now idles around 9%. Crashed during export (appears to have used previous system time, likely not updated due to crash)
The next attempt to export caused a wlan disconnect, but not a crash, after about 5 minutes. Yet another export attempt finally worked taking one and a half minutes at 100% CPU.

The 7.3beta33 worked lovely on my hap Lite, but 7.3beta34 boot looped my audience with wifiwave2.

I've just downgraded both to 6.48.6 long term as while wifiwave2 is nice, I see no benefits for my hap lite.

Issue has gotten better with 7.5
The export finishes now but it takes a minute and hammers the cpu at 100% for the entire minute.

hAP mini 7.10
I started export about 15min ago
Still waiting... CPU: 100%

It's really ridiculous that you could think of using RouterOS 7 on a SMIPS device.
Why don't you install macOS Ventura on an older PowerPC?