Hello,
How can i set a metric for the default route via OSPF.
We want router1 to be the primary default and router2 the back-up for all other routers in our network.
In V6 you could do it under the Instance settings, see screenshot.
In v7 there is no such option, i have tried it with a route filter like: add chain=ospf-out-v2 rule="if (dst==0.0.0/0) {set ospf-ext-metric 20; accept;}"
But it lookes like it is getting ignored.
V7 OSPF Default Route Metric
You do not have the required permissions to view the files attached to this post.
Re: V7 OSPF Default Route Metric
Setting metric in v7 is possible only with filters and it looks like you did everything correctly.
Are you using 'originate-default=always'?
It works for me:
Are you using 'originate-default=always'?
It works for me:
Code: Select all
/routing/ospf/instance/print
name="default-v2" version=2 vrf=main router-id=main out-filter-chain=ospf-test
/routing/filter/rule/print
chain=ospf-test rule="if (dst==0.0.0/0) {set ospf-ext-metric 20; accept;}"
/routing/ospf/lsa/print
SD instance=default-v2 type="external" originator=192.168.100.1 id=0.0.0.0 sequence=0x80000001 age=1 checksum=0x5719 body=
options=E
netmask=0.0.0.0
forwarding-address=0.0.0.0
metric=20 type-1
route-tag=0
Re: V7 OSPF Default Route Metric
I dit using: Are you using 'originate-default=always'
I dit not check /routing/ospf/lsa/print
I have downgraded the router for now to v6 so i can not test it during work hours.
If it is the correct way, i will check again during evening or build a small test test set-up.
I dit not check /routing/ospf/lsa/print
I have downgraded the router for now to v6 so i can not test it during work hours.
If it is the correct way, i will check again during evening or build a small test test set-up.
Re: V7 OSPF Default Route Metric
Unfortunately the problem here is that the filters wont work on default dst originated from 'originate-default=always'.
In my case the default is originated from routing table dst.
In my case the default is originated from routing table dst.
Re: V7 OSPF Default Route Metric
Oke, i don't really understand what you mean?
So i need to disable the originate-default option
Create a filte rule with: add chain=ospf-out-v2 rule="if (dst==0.0.0/0) {set ospf-ext-metric 20; accept;}"
And then i lose you, because if i do so no default route is given..
So i need to disable the originate-default option
Create a filte rule with: add chain=ospf-out-v2 rule="if (dst==0.0.0/0) {set ospf-ext-metric 20; accept;}"
And then i lose you, because if i do so no default route is given..
Re: V7 OSPF Default Route Metric
Sorry for not being clear.
Currently it is not possible to change metric for default originated with 'originate-default=always' as the filters are not applied in that case.
In my case I had default route within my routing table (static) and so the filter worked as expected.
Currently it is not possible to change metric for default originated with 'originate-default=always' as the filters are not applied in that case.
In my case I had default route within my routing table (static) and so the filter worked as expected.
Re: V7 OSPF Default Route Metric
No problem, happy with your help!
Oké but on my router1 and router2 i also have a static default route
so in theory i should be possible to give it through to other routers (router3 router4 etc) via a route filter? if i understand you correctly..
Oké but on my router1 and router2 i also have a static default route
so in theory i should be possible to give it through to other routers (router3 router4 etc) via a route filter? if i understand you correctly..
Re: V7 OSPF Default Route Metric
Yes, then filter should be sufficient and 'originate-default=' is not necessary.
Who is online
Users browsing this forum: No registered users and 3 guests