Hi
I got a 10Km wireless link using RB411AH and 30dbi antenna . my best signal after working around the configuration is around -60dbm and the tx/rx rate shown in registration is like 48Mbps .
I know the signal is not very good specially considering the low CCQ but I want to know if this case is normal and if yes what is the actual reason .
although radio show around 48Mbps tx/rx rate my actual throughput is around 6Mbps ( around 700KBps when copying files ) and not getting any better .
-
-
amin137398
just joined
- Posts: 5
- Joined:
wireless link throughput doesn't match tx/rx rate
You do not have the required permissions to view the files attached to this post.
-
-
DeDMorozzzz
Frequent Visitor
- Posts: 88
- Joined:
Re: wireless link throughput doesn't match tx/rx rate
Hello.
Try another channel. It looks like the one you are using is occupied
also you have bad signal. one chain is realy low. Chek pigtails
Try another channel. It looks like the one you are using is occupied
also you have bad signal. one chain is realy low. Chek pigtails