MikroTik

Posted: **Sun Jan 16, 2005 12:14 am**

a few days ago i enabled the web-proxy on a mt router with fairly high traffic. since then the system has crashed completely (hardware reset necessary) every day and the log has often this error line:

Web-proxy error while running: squid was killed with signal11, restarting

system is a p3 pc with 4 intel-NICs, 128 mbyte RAM, router os 2.8.22 on CF and a 10 gbyte IDE-hd as cache drive. cpu load is usually below 20 percent. the proxy is running as transparent proxy with the usual dst-nat rules in place. the router is running mainly as PPPoE-server and has OSPF enabled.

anyone with similar problems or an idea?

tia.
matthias

Posted: **Sun Jan 16, 2005 3:49 am**

The web proxy is not stable in my opinion. I have started turning it off in most of my machines because I just can't trust it.

Posted: **Mon Jan 17, 2005 2:55 pm**

I upgrade to 2.8.22 and the web proxy is slow. If i stop it the navigation is fast, but if i enabled it is turn slow
M.

Posted: **Tue Jan 18, 2005 1:35 pm**

Try increasing RAM, reducing diskspace used by cache, making sure drive doesn't have errors.

Posted: **Mon Jan 24, 2005 5:11 am**

Try limiting Cache Size in the HDD to 2Gb or less...
Regards

Posted: **Mon Jan 31, 2005 9:46 pm**

as u mentioned her u have 10GB HDD then at least 16 MB of required per GB either u increase RAM or decrease cache space

MikroTik

router with web-proxy enabled crashes

router with web-proxy enabled crashes

Re: router with web-proxy enabled crashes