MikroTik

Hi all,
I've a strange problem with an RB532A with last RouterOS version (2.9.46): if I configure one IP address on its eth1 interface, I can ping and manage it. As soon as I add a new IP (on a different subnet of course) on another interface (e.g. wlan1), I cannot ping its IP on eth1 any more and I can manage it only via WinBox on its MAC address.

Any idea?

your gateway is your ether1 ip address?

Yes,
but this is not important because my PC and MT eth1 are on the same subnet, e.g.

PC 192.168.1.2/24
MT eth1 192.168.1.1/24
MT wlan1 192.168.2.1/24

if I assign only one IP to MT (eth1 or wlan1) everything is ok, but when I assign the second IP I cannot reach none of them.

Rgds

I thought it was due to the miniPCI used (Ubiquity XR5), so I've change it with an R52, but nothing changed..

Ok, my fault...
I've inserted an IP address without mask information: 192.168.1.1 instead of 192.168.1.1/24
I'm sorry...

Rgds