Hi there,

i have vlan 30 in bridge.
vlan filter is on. ingress be filtered out, only tagged ollowed on all ports.
Ports sfp1,sfp2,sfp3,sfp4
sfp2, sfp3,sfp4 should only be communicate with sfp1 (port-forwarding) - ok, this works.

Now i came with vlan11 on sfp2 and sfp3.
vlan11 should be communicate with vlan30
I can translate port sfp2 and sfp3 vlan11 to vlan30 out on sfp1, but must i be set vlan11 in bridge-vlan oder only vlan30?
what is with the traffic from sfp1 to sfp2 and sfp3? this should be translate from vlan30 to vlan11.
sfp1 should not be translate to sfp4

thank you