Different SSID's and bands

Cizma · Sat Mar 18, 2023 12:40 am

Hi everyone,

I have setup with 3 CAP devices and one Mikrotik as CAPsMAN. I have two different SSID's on different VLAN's. One SSID is used for internal use and another for guests. I want to have internal SSID on 2GHz and 5GHz and guest only on 2GHz. I have created two configurations and in configuration of guest selected 2GHz band.

In provisioning, I have selected normal wifi as primary configuration, and guest as slave configuration. When CAPs are provisioned it looks like this:

The problem is that CAPsMAN provision guest also on 5GHz and every device can connect to 5GHz which is not what I want. Can someone help me with this?

Ca6ko · Sat Mar 18, 2023 10:32 am

In Provision in the action I select "creation enabled", instead of "creating dynamic enabled". Then the interface is created once on connection and it can be edited manually. change all parameters.

erlinden · Sat Mar 18, 2023 10:33 am

Can you please share the configuration:

 /caps-man export

That will provide a lot more information (at least, I hope).

Cizma · Sat Mar 18, 2023 1:36 pm

here is the configuration

/caps-man configuration
add channel.skip-dfs-channels=yes country=croatia datapath.bridge=bridge .vlan-id=1 \
    .vlan-mode=use-tag distance=indoors installation=indoor mode=ap name=WiFi \
    security.authentication-types=wpa2-psk .encryption=aes-ccm ssid="Cizma WiFi"
add channel.band=2ghz-b/g/n .skip-dfs-channels=yes country=croatia datapath.bridge=\
    bridge .vlan-id=2 .vlan-mode=use-tag distance=indoors installation=indoor mode=ap \
    name="Guest WiFi" ssid="Cizma Guest"
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-dynamic-enabled master-configuration=WiFi slave-configurations=\
    "Guest WiFi"

Different SSID's and bands

Different SSID's and bands

Re: Different SSID's and bands

Re: Different SSID's and bands

Re: Different SSID's and bands