Page 1 of 1
NTP client dosn't work....
Posted: Fri Nov 16, 2007 8:31 pm
by a-l-i-e-n
I'm using NTP client on all of the RB133 and it is working, when I tryed to enable this in RB333 wiht v3.0rc7 it didn't work....
I tryed with server Im using on all other RB boards...
RB333 has acces to internet so it should work...
Re: NTP client dosn't work....
Posted: Sat Nov 17, 2007 12:25 am
by skillful
Upgrade the RB333 to RC10 and try again.
Re: NTP client dosn't work....
Posted: Sat Nov 17, 2007 12:57 pm
by a-l-i-e-n
tryed with rc10 too and it dosen't work eather
I'm using server 207.46.130.100... this NTP server works on all non beta routers... tryed with diferent NTP server on rb333 (time.windows.com) and this one works...
I think that it should work with 207.46.130.100 too but because unknown reason it dosen't...
Re: NTP client dosn't work....
Posted: Sun Nov 18, 2007 1:57 am
by rafa_lore
Hello
Sorry I will make a stupid question!!
In ip firewall filter, do you enable the port 123, to permit pass the ntp protocol?
I had the same problem and I solve it making a rule to enable pass this port
Bye
Rafael Lore