MikroTik

Posted: **Mon Oct 02, 2023 6:51 pm**

Hi all, no matter what I try, I'm not able to run the Uptime-Kuma on my router. While I can successfully run a pihole container, numa always hangs during the layers download phase. See the screenshot for details. Logs don't show anything meaningful. Is there something I can do to troubleshoot this issue? Many thanks.

[admin@MKT-GW-GE] > system/resource/print 
                   uptime: 1h17m14s
                  version: 7.11.2 (stable)
               build-time: Aug/31/2023 13:55:47
         factory-software: 6.99
              free-memory: 101.4MiB
             total-memory: 256.0MiB
                      cpu: ARM
                cpu-count: 4
            cpu-frequency: 448MHz
                 cpu-load: 2%
           free-hdd-space: 1248.0KiB
          total-hdd-space: 15.2MiB
  write-sect-since-reboot: 1235
         write-sect-total: 2331739
        architecture-name: arm
               board-name: D53G-5HacD2HnD
                 platform: MikroTik

Posted: **Tue Oct 03, 2023 7:12 am**

Check your disk space while deploying your second container.

Posted: **Tue Oct 03, 2023 10:13 am**

Thanks, but it has plenty. It's a 16gb USB stick.

Posted: **Thu Oct 05, 2023 12:40 pm**

Could you please check with different USB drive?

Posted: **Wed Nov 29, 2023 11:33 am**

You may try as following (must have Workdir, Mounts).
Please know Uptime-Kuma will generate more than 30,000 files, that your router CPU will always run at 100% on single core.

winbox64.v3.40_20231129_171918.png

MikroTik

Uptime-Kuma on Chateau

Uptime-Kuma on Chateau

Re: Uptime-Kuma on Chateau

Re: Uptime-Kuma on Chateau

Re: Uptime-Kuma on Chateau

Re: Uptime-Kuma on Chateau