Page 1 of 1
Low throughput on CHR
Posted: Fri Oct 27, 2023 1:10 pm
by andreacar
Hi everyone,
I'm revisiting this post to ask if there is a solution to the problem of low traffic.
I installed a CHR with version 7.11.2 but I have a maximum reception traffic of 1.5Mbit.
Even by changing MTU the situation does not change.
Thank you
Re: Low throughput on CHR
Posted: Fri Oct 27, 2023 1:50 pm
by tangent
That sounds like you are attempting to use the free license, with its
documented 1 Mbit/sec throughput limit. That license is meant for testing things out to find out if everything is working by showing that traffic routes as it should.
Re: Low throughput on CHR
Posted: Wed Mar 13, 2024 3:57 pm
by CheshirCa
The same problem, P1-perpetual license, VPS from the Zomro hoster - the traffic speed on the gigabit ethernet interface is no higher than 1.5 megabits, there are no such problems on version 6.49.13
Re: Low throughput on CHR
Posted: Sat Mar 16, 2024 9:57 am
by kevinds
The same problem, P1-perpetual license, VPS from the Zomro hoster - the traffic speed on the gigabit ethernet interface is no higher than 1.5 megabits, there are no such problems on version 6.49.13
If you do a bandwidth-test is the received speed 'normal'? Or is it also 1.5 mbps?