Page 1 of 1
R52 power question
Posted: Fri Dec 14, 2007 7:18 pm
by ccr
What is a safe level you can turn tx-power/all-rates-fixed up to. Thanks,
Re: R52 power question
Posted: Fri Dec 14, 2007 8:15 pm
by jwcn
default
Re: R52 power question
Posted: Mon Dec 17, 2007 4:48 pm
by normis
you should not turn-up anything. this is for lowering, or leaving at default.
Re: R52 power question
Posted: Mon Dec 17, 2007 5:28 pm
by janisk
usually default setting is maximal available power, so, ig you rise it up you can and you may damage your wireless card eventually. use tx power settings only to lower power if your signal levels are too high - -50 down to -60 dB is ok signal.
Re: R52 power question
Posted: Sat Dec 22, 2007 11:38 pm
by wifier
I have set it on 18dbm for some time. It's working OK so far.