MikroTik

I have completed this work:
over 2OO internal and external AP-ACs all wired in fiber optics 9/125. 3x vlan: wifi guest(VLAN100), wifi management(VLAN200), wired voip(VLAN50).
CCR1016, CRS318, RBD22UGS-5HPacD2HnD, RBwsAP-5Hac2nD, RBcAPGi-5acD2nD, SFP+
Suggestions to give me? Thank you

Suggestions ? Is there something wrong ? Something not working right ?

Anyway, after 200 CAPs you set up, i would suggest cold beer or two

Write a blog post about the DO's and DONT's you experienced while setting this up so that others can learn from your experience and maybe even prevent them from making the same mistakes you did. F.e. how did you implement routing and authentication?

Installation & Config is 1 aspect, actual operational performance another.
What type of installation-environment ? Industrial ? School ? Stadium/venue ?

keep calm!!!
Installed in a village-hotel with around 180 rooms.
Main settings that I recommend:
1) Powers tx at 10/16 dBm,
2) Access-list reject range -120..-85
3) All powered by 48volt Poe
4) Every 4 Access points (rooms) are configured 2x 5Ghz and 2x 2.4 Ghz on different channels with Provisioning > identity regexp. Example Room1/1 "AP1", Room1/2 "AP2", Room1/3 "AP3", Room1/4 "AP4".... Room2/1 "AP1", Room2/2 "AP2", etc.
5) Importantly, before installing I reset the APs to Caps Mode, recorded all the mac addresses and softwareIDs, and assigned them by room and installed position, in excel file.
And blonde ..... beer

I see topic for the next MUM.

Topic: "How I upgraded 203 CAPs to wifi-qcom-ac"

But RBwsAP-5Hac2nD not wave2 compatible. Sad. Would have been a fun to listen to such a talk

Installed in a village-hotel with around 180 rooms.
...
1) Powers tx at 10/16 dBm,

- 180 rooms and 200 APs? Does that mean that every room has a single AP, how big are those rooms?!
- How did you decide on 10/16 dBm?

He forget the endy bit.......
I have completed this work:
over 2OO internal and external AP-ACs all wired in fiber optics 9/125. 3x vlan: wifi guest(VLAN100), wifi management(VLAN200), wired voip(VLAN50).
CCR1016, CRS318, RBD22UGS-5HPacD2HnD, RBwsAP-5Hac2nD, RBcAPGi-5acD2nD, SFP+ and my hair turned grey and then fell out!

Topic: "How I upgraded 203 CAPs to wifi-qcom-ac"

But RBwsAP-5Hac2nD not wave2 compatible. Sad. Would have been a fun to listen to such a talk

In a room with 2/3 beds?
In a room with 2/3 beds? I'll think about it... maybe
it's not interesting

Installed in a village-hotel with around 180 rooms.
...
1) Powers tx at 10/16 dBm,

- 180 rooms and 200 APs? Does that mean that every room has a single AP, how big are those rooms?!
- How did you decide on 10/16 dBm?

Simple. With many tests

Topic: "How I upgraded 203 CAPs to wifi-qcom-ac"

But RBwsAP-5Hac2nD not wave2 compatible. Sad. Would have been a fun to listen to such a talk

In a room with 2/3 beds?
In a room with 2/3 beds? I'll think about it... maybe
it's not interesting

Well, think twice. pornhub is one of the most visited websites worldwide. I guess it even ranks higher in "bedrooms".

In a room with 2/3 beds?
In a room with 2/3 beds? I'll think about it... maybe
it's not interesting

Well, think twice. pornhub is one of the most visited websites worldwide. I guess it even ranks higher in "bedrooms".

CIF quality