It's a RouterBOARD with integrated high power 2.4Ghz 26dBm wireless interface, list price $119. We hope to have these in stock by the end of January. They are available for preorder from our website at https://www.quicklinkwireless.com/default.asp?pid=1235

CPU MIPS32 4KEc based 184MHz embedded processor
Memory 32MB SDRAM onboard memory chip
Boot loader RouterBOOT, 1Mbit Flash chip
Data storage Onboard NAND with RouterOS software, License Level4
Ethernet One 10/100 Mbit/s Fast Ethernet port supporting Auto-MDI/X
Wireless standards IEEE802.11b (1..11Mbit/s, auto-fallback); IEEE802.11g (6..54Mbit/s,
auto-fallback, IEEE802.11b compatibility option, supports Turbo)
Wireless frequency 2412-2462Mhz (US FCC), with 5Mhz, 10Mhz, 20Mhz, 40Mhz band.
TX Output power 1-54Mbps: 26dBm (2422-2457MHz), 24dBm (2412, 2462MHz)
Receive sensitivity 802.11b: 1Mbps -97, 11Mbps -92. 802.11g: 6Mbps -94, 54Mbps -74
Serial port One DB9 RS232C asynchronous serial port
Speaker Mini PC-Speaker
Power options IEEE802.3af PoE: 12V or 48V DC including over datalines.
Power jack: 11..60V DC
Power output 3V and 5V DC fan power output headers, maximal output current -
500mA total
Dimensions 10.5 cm x 9.5 cm (4.13 in x 3.74 in)
Power consumption typical – 6W, max - 12W

-Gerard

Sounds like it would make a great WiFi AP.

will it have a U.Fl antenna connector like the miniPCI interfaces (R52, etc)?

Oops, Mikrotik didn't let me attach the pdf file b/c it was too large..

Here is the PDF

http://www.shelbywireless.com/files/crossroads3.pdf

-Gerard

what! no ABG radio .... uhhh!

Yeah, why would you do this? $118? A little more than 411+r52H at discount, less capability, ( and hate u.fl ).. And if a radio goes, you have to replace the whole thing.. We've seen a decent percentage of R52H's go bad or be bad that we use Ubiquiti for any critical locations... This will be fine for an imbedded radio but pass on anything not mass produced...