Page 1 of 1

What type of antennas and devices do you use for WISP

Posted: Fri Apr 11, 2008 9:07 am
by dxnation
Hello MTians,

We have been discussing about RouterBoards and RouterOS since a long time. However, I am curious to know about the wireless devices (sector antenna, omni antenna, grid antenna, connectors, surge protectors, casing etc) that we all are using for our networks.

Let us see what type of networks each of us have built.

This Topic will even help a newbie to understand the wireless network and can be used as a Case Study.

Normis,
what are your thoughts on this ?

help to setup and configure mikrotik hotspot

Posted: Fri Apr 11, 2008 1:23 pm
by josseliny
Hello to you,
Please i would like some one to help me setup and configure mikrotik hotspot.
I have aleady intall mikrotik router with two network card : lan and wan.
So can you please help me configure this ?
we want to setup up a rural project for our village in Cameroun ( Africa)
Am wating for your help
Best regard
YOUMBI

Re: What type of antennas and devices do you use for WISP

Posted: Fri Apr 11, 2008 1:35 pm
by RK
Let us see what type of networks each of us have built.
Lets start by you, dxnation, telling us about your network.
You need to lead the way :)

Re: What type of antennas and devices do you use for WISP

Posted: Sat Apr 12, 2008 11:30 am
by Tanker
Keeping a close watch on this......

Should be interesting... :lol:

Tanker

Re: What type of antennas and devices do you use for WISP

Posted: Sat Apr 12, 2008 9:10 pm
by dxnation
Mine is a startup project.

I have a base station builtup using RB133 (3 ether, 2wlan).

Wlan1 connected to a 2.4 Ghz omni antenna (point to multipoint)

Wlan2 is connected to an Andrews Grid antenna (point to point)

Wlan3 is not being used.

CPEs are either RB133C or CellAmericas Product.

I want to migrate to 5.8 Ghz devices soon as the interference it too strong in my city. This is my thoughts for new network.

RB600 for base station.
120 degree sector antenna * 3 (5.8 Ghz...need to find the product).

CPE would be RB411 attached to 5.8 Gbz antenna.

Any thoughts on this ?