MikroTik

Posted: **Mon May 19, 2008 11:30 pm**

Hi everybody

I'm using a RB200 with 48v but when I connect my laptop to Ethe1 or Ethe2 I not have link but if I connect the RB200 to the Switch then it work fine......

My ethernet port is fine because i can configure my Mikrotik 511, 532 with 18v.

what's wrong?

Thanks

Heri

Posted: **Tue May 20, 2008 12:01 am**

try crossover cable

Posted: **Tue May 20, 2008 1:43 am**

RB200 series does not have Auto-MDIX ethernet ports. Every other RB released after that starting with the RB500 does. Therefore, you will either need a crossover cable as EgyCom instructed, or you will need to plug both the RB200 and your laptop into a hub or switch together.

-- Nathan

Posted: **Tue May 20, 2008 4:52 am**

Thank's

I fix the trouble with crossover cable.

MikroTik

RB200 Ethernet Port no Link with My Notebook Ethernet Port

RB200 Ethernet Port no Link with My Notebook Ethernet Port

Re: RB200 Ethernet Port no Link with My Notebook Ethernet Port

Re: RB200 Ethernet Port no Link with My Notebook Ethernet Port

Re: RB200 Ethernet Port no Link with My Notebook Ethernet Port