MikroTik

Posted: **Thu Jun 05, 2008 11:24 am**

This is a problem that I have not ever happened, but there is always a first time.

when install the rb411 in some cases, the PC would not the network card and tells me network cable unplugged. This problem is present only in RB411 the rb133C never appear this.

0 ether1 ether 1500
1 R wlan1 wlan 1500
2 R pppoe-out1 pppoe-out 1480

the cable is plugged, the pc is on but the link is not present...

Posted: **Mon Jun 09, 2008 11:52 pm**

my problem with that is my ends were not put on correctly. had a faulty set of crimpers.

Posted: **Mon Jun 16, 2008 5:28 pm**

the cables are ok, I continue to have the same problem, and say the real thing annoys me, this only with 411, 133C rarely gave this problem.
I do not understand but I am not a few are creating serious problems with the work.

MikroTik

RB 411 ethernet problem -not link-

RB 411 ethernet problem -not link-

Re: RB 411 ethernet problem -not link-

Re: RB 411 ethernet problem -not link-